• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Search results

  1. C

    lsx 1T XJ

    finally got the rear bumper and tire carrier done and powder coated. the last few days have be long. getting to work at 6 working on it for 3 hours, work then get off at 6 then back to work on them till 10. it was so worth the work
  2. C

    lsx 1T XJ

    got the t case all modified and installed. most of the wiring done, front fender flairs on and grill mocked up. going to get the steering done this weekend and hope to start it.
  3. C

    lsx 1T XJ

    no there is a plate that ties the bumper back to the gear box bolts as wells just don't have a photo of that
  4. C

    lsx 1T XJ

    not much time in the garage the last month. go the LS harness 90% done here are some photos
  5. C

    Wanted: HP D30

    im with IRO
  6. C

    Wanted: HP D30

    I loaded it up last night for you.
  7. C

    Ford Super Duty Dana 60 axles

    got a few more in, willing to make a deal at $300 I can deliver to WF
  8. C

    Wanted: HP D30

    i do have it and it had aftermarket fixed short lower arms. it is a HP but not sure the year. I can bring it if you want
  9. C

    Wanted: HP D30

    I think I still have one in storage. if I do you can have it. it is just the housing nothing else
  10. C

    Ford Super Duty Dana 60 axles

    I have a few 03-04 ford super duty Dana 60 with 3.73 gears. lower miles complete minus the lockouts and calipers. have all the factory brackets and mounts cut off and ground down ready to weld truss and mounts on to. willing to load them up and deliver them to WF. $400 thanks
  11. C

    Whatcha need to get done before WF17

    IRO is bringing 4 jeeps this year. Green Moomba is getting JK 44s front and rear and a new 4 link system in the front as we speak. MJ needs the front end put back together and a few little things, other XJ fix the rear brake caliper that is sticking and mine I have to install my beadlocks...
  12. C

    lsx 1T XJ

    here is the bumper all finished and ready for powder coating. got the stinger and the light mounts all drilled and welded on
  13. C

    Opinion on donor vehicle for LS and 1 ton swap.

    here is the link to my build im doing now. http://www.naxja.org/forum/showthread.php?t=1132921 im using a 4L60E little smaller trans and a 231 t case. the one from the truck, the tail shaft housing is long and you will have a steep rear shaft angle.
  14. C

    lsx 1T XJ

    yea I know chevy in a jeep. I couldn't go wrong $360 for the motor with 125K and 3 year warranty. should be 350hp and 80 pound lighter then the 4.0
  15. C

    lsx 1T XJ

    update! the motor and trans is in. got the rear to 6.5" and got the arms all adjusted. the front is in with just the lowers, still need to make the front uppers. I think it looks good 6.5" on 37"
  16. C

    lsx 1T XJ

    Iron Rock Off Road, it is a prototype right now BUT they are wanting to make it production.
  17. C

    lsx 1T XJ

    new 4 link front mounts and cross member. wish It would be on the road in January but not going to happen. my goal is winter fest
  18. C

    lsx 1T XJ

    got the rear in last night, 8" coils in the rear with the high fender flairs is a bit much. going to swap them out for 6.5" and see how that looks. but the rear is on the ground!!!
  19. C

    lsx 1T XJ

    got the rear end put together and the center and rear frame stiffeners all welded in over the weekend
  20. C

    lsx 1T XJ

Back
Top