Search results

First 5000 takes it. (minus the winch) not sure where to start has about 210,000kms and confident with keep going for many more, would not hesitate to drive it across the country tomorrow. drove it to moab the last 3 years and it performed flawlessly even made it in the april 2009 issue of jp...

thats right... my dana 30 ring gear, well a few teeth anyways. i'm not to surprised seeing as i am locked with 35s but i am wondering if there is a brand out there that has been holding up a little better. it was a yukon set so looking to replace it for now and upgrade to a dana 44 before...

hi guys and maybe girls. looking at replacing my rear leafs and going lower at the same time. i currently have some old rustys 6.5 inch leafs with a 1.5 inch longer shackle. i never liked the leafs as they seemed to long and the ride sucks. i am running 35s with bushwacker cutouts and i...

Looking at a new set of tires to replace my almost bald Goodyear MTRs they are 35x 12.5 r15 The trails up here are quite muddy with some rockcrawling in between the mud so i think i want to give these tires a a shot. want to hear from someone who has seen or used them how big the 35 12.5 15...

anyone know where a good place to buy rods ends, misalignment spacers and tubing adapters? looking at building some tie rods and maybe a track bar for my cherokee. prefferably an online store that is naxja friendly

can someone tell me who makes a bracket for the axle side so i can move the track bar up a couple inches. i am going to build a new trackbar/ steering and i would like to mount the trackbar approximately where the steering stabilizer normally mounts.

hello my wife and I will be in the Blanding area the days leading up to fall fling. will be doing some trails in the area if anybody is interested. some of the trails i am going to try and do include elephant hill, bobbys hole, beef basin and maybe valley of the gods trail. i have done...

it weighed in at 2185 kgs or 4820lbs with me in it and a full load of tools etc. if anyone is curious i have 35s, winch, armor, bumpers and skid plates. to tow behing my motorhome i need it to be under 2000kg so i am pretty close. i am wondering how much all the trim,carpet, and useless...

looking at upgrading my steering and came accross this bolt on high steer bracket http://bluetorchfab.com/store/product_info.php?products_id=447 has anyone used this or have any pictures of it installed.

Looking a purchasing a 1980 dodge 26 foot class c motorhome. it has a rebuild dodge 360. My question is will it have enough power to flat tow my lifted xj? my xj is about 40% of the gvwr of the motorhome so i will not need aux brakes to be legal, although i might get them to be safe. has...

I just blew my sidewall out and need new tires anyway. does anybody have any shops they recommend. looking for 35 12.5 15s mts

Well i am leaving today from kimberley b.c. canada, its about 1100 miles so not to bad of a distance. However, when you have a loaded down jeep with 35s and you are pulling a tent trailer you can't go to fast. we are heading to missoula mt then down to sun valley idaho, salt lake city...

no smartass replys please. just wondering if the law will pull me over if i remove my doors for the week. i have tube doors with mirrors.

i have searched around but haven't found a really good write up. my ring gear just exploded so i need to replace. does anybody have any links to a really good step by step article showing how to replace the ring and pinion on a dana 30.

ordered the wrong part. this one is for an open carrier 8.25 Differential: Chrysler 8.25" 8-1/4" 10 Bolt Axle Spline Count: 29 Ring Gear Bolt Count: 10 Vehicle Application: * 1997 & Newer Dodge Dakota * 1997-2001 Jeep Cherokee Sport XJ * 1997-2001 Jeep Cherokee Classic XJ * 1997-2001 Jeep...

have a 98 auto with aw4 tranny andl i can't seem to find any dextron 3/mercon anywhere. auto part store i usually deal with says dextron 6 is the replacement. i have searched this but seems like most people have been stocking up on dex 3 and couldn't find anyone that has been using the new...

coming from canada for fall fling eh! having never wheeled my xj in moab before i am wondering what mods are needed/ recommended for the harder 7 and 8 rated trails. maybe some people who have done the trails can describe their xj and how it did. i have 6 inches, 35s, front locker, sliders...

i need a locker for my 8.25 29 spline (open carrier) selectable or powertrax no slip. let me know what you have, condition and price.

i am looking into getting some new fox 2.0 shocks. i searched but didn't see any information on valving. is there anybody using them front and back? if so what did you get them valved at for your xj. also could someone explain what the numbers mean. which number is the compression and...

this is a brand new jcr over the knuckle complete steering kit. i am going to be swapping axles so i have no use for it. it is brand new and had never been on a vehicle. i have painted it with rocker guard. i am also going to include a reamed pitman arm, the reamer and an 11/16 drill bit...