• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

75SV1's latest activity

  • 7
    75SV1 replied to the thread 3 Link Discussion 2024.
    I went with Ironman front and rear and Dirt Bound. I don't think Dirt Bound would be one that covers the OP's objectives. I did look at...
  • 7
    75SV1 replied to the thread XJ radiators, a review..
    DPG Offroad: https://dpgoffroad.com/product/csf-hd-3-row-radiator-jeep-cherokee-91-01-open-system/ Its a CFS unit...
  • 7
    75SV1 replied to the thread XJ radiators, a review..
    I've run the DPG with the stock fan. You'll need to use a MOPAR (stock) fan clutch. The after markets have protrusions, that are very...
  • 7
    75SV1 replied to the thread What frame stiffeners.
    Just want to correct some of my info. The Ruff Stuff front stiffeners I used are an older set. Looks like they changed the design. Mine...
  • 7
    75SV1 replied to the thread What frame stiffeners.
    The King seems to have a few more parts. The front plate is also offered by Hooligan and M&T. I do have the front and rear inner...
  • 7
    75SV1 replied to the thread What frame stiffeners.
    I have used Ruff Stuff fronts, IRO Mid, Hooligan Front, Mid and Rear. Also, ARES rear. And I have a set of IRO rear. The Ruff Stuff...
  • 7
    75SV1 replied to the thread WJ knuckle and unit bearing swap with custom RCV axles.
    I run the Ruff Stuff 1-ton cross over kit. I'd compare prices to the Currie link. It might seem over kill. Still, I can drive hand off...
  • 7
    75SV1 replied to the thread Newbie with an XJ, Update.
    Yes, I'll heat up bolts. It helps to an extent. I'll also drill out the core of the bolt. And sometimes, its so rusted, its practically...
  • 7
    75SV1 replied to the thread Newbie with an XJ, Update.
    Um, no. Cutting oil has sulfur in it.
  • 7
    75SV1 replied to the thread Newbie with an XJ, Update.
    Also, when you loosen the bolts, try to loosen, then tighten a few times. When the bolt is 'free', then apply 10W-30 to the threads...
  • 7
    75SV1 replied to the thread WJ knuckle and unit bearing swap with custom RCV axles.
    I did use stock XJ axles shafts. Also, you will need 1/4 spacers or washers for the caliper bracket, and WJ lower ball joints. IRO sells...
  • 7
    75SV1 replied to the thread Regular maintenance schedule for a daily driver?.
    Rotella has around 1200 ppm of Zinc. That is good for the 4.0L and flat tappet cams. Some of the Break in oils are 1600 ppm.
  • 7
    75SV1 replied to the thread headlight harness.
    I had one of the cheapies sockets come off at night. not fun driving home. Cop let me on my way after flashing me. Others hi-beaming me...
  • 7
    75SV1 replied to the thread Regular maintenance schedule for a daily driver?.
    I use the 10W-30 in my MB240D during winter months, before I switched to the T6. They have recently been making 10W-30 T6. I haven't...
  • 7
    75SV1 replied to the thread WJ knuckle and unit bearing swap with custom RCV axles.
    I have done a WJ setup with WJ hub bearing units. The same height as 2000-01 XJ units. I do use the weld on spacer. Also, 07-08 Dodge...
Show older items
Back
Top